Product Code Database
Copper sulfides describe a family of chemical compounds and minerals with the formula CuxSy. Both and synthetic materials comprise these compounds. Some copper sulfides are economically important .
Prominent copper sulfide minerals include Cu2S (chalcocite) and CuS (covellite). In the mining industry, the minerals bornite or chalcopyrite, which consist of mixed copper-iron sulfides, are often referred to as "copper sulfides". In chemistry, a "binary copper sulfide" is any binary chemical compound of the elements copper and sulfur. Whatever their source, copper sulfides vary widely in composition with 0.5 ≤ Cu/S ≤ 2, including numerous non-stoichiometric compounds.
Monosulfides, 1.6 ≤ Cu/S ≤ 2: their crystal structures consist of isolated sulfide anions that are closely related to either close-packing or fcc lattices, without any direct S-S bonds. The copper ions are distributed in a complicated manner over interstitial sites with both trigonal as well as distorted tetrahedral coordination and are rather mobile. Therefore, this group of copper sulfides shows ionic conductivity at slightly elevated temperatures. In addition, the majority of its members are .
Mixed monosulfide and disulfide compounds of copper contain both monosulfide (S2−) as well as disulfide (S2)n− anions. Their crystal structures usually consist of alternating hexagonal layers of monosulfide and disulfide anions with Cu cations in trigonal and tetrahedral interstices. CuS, for example, can be written as Cu3(S2)S. Several nonstoichiometric compounds with Cu:S ratios between 1.0 and 1.4 also contain both monosulfide as well as disulfide ions. Depending on their composition, these copper sulfides are either semiconductors or metallic conductors.
At very high pressures, a copper disulfide, CuS2, can be synthesized. Its crystal structure is analogous to that of pyrite, with all sulfur atoms occurring as S-S units. Copper disulfide is a metallic conductor due to the incomplete occupancy of the sulfur p band. Different stoichiometric compositions can be obtained by changing the redox atmosphere of the synthetic environment.6
Further evidence that the assignment of the so-called "valence hole" should be to the S2 units in these two formulae is the length of the S-S bonds, which are significantly shorter in CuS (0.207 nm) and CuS2 (0.203 nm) than in the "classical" disulfide Fe2+(S2)2− (0.218 nm). This bond length difference has been ascribed to the higher bond order in (S-S)− compared to (S-S)2− due to electrons being removed from a π* antibonding orbital. NMR studies on CuS show that there are two distinct species of copper atom, one with a more metallic nature than the other. This apparent discrepancy with the X-ray photo-electron spectrum data simply highlights the problem that NMR has in assigning oxidation states in a mixed-valence compound. The issue of the valence of copper in sulfides (as well as selenides and tellurides) continues to be revisited in the literature. A good example is a 2009 study of the ternary compound CuCo2S4Electronic environments in carrollite, CuCo2S4, determined by soft X-ray photoelectron and absorption spectroscopy
Alan N. Buckley, William M. Skinner, Sarah L. Harmer, Allan Pring and Liang-Jen Fan
Geochimica et Cosmochimica Acta
Volume 73, Issue 15, 1 August 2009, Pages 4452-4467 (a spinel mineral known as carrollite) that "was undertaken primarily to establish unequivocally the oxidation state of the Cu in the mineral" and concluded "that the experimental and simulated Cu L2,3 absorption spectra established an unequivocal oxidation state of CuI in the carrollite bulk".
|
|
